Usage: Semiconductor industry (precursor, electronic chemical distillation purification)

Equipment structure: The distillation kettle adopts a horizontal reboiler structure with U-shaped heat exchange tubes inserted inside; The distillation tower adopts a three-stage packed tower and is equipped with a trough plate liquid distributor and a truncated cone redistributor; A horizontal condenser is installed at the top of the tower; Polishing BA, EP or lining/spraying PFA, PTFE inside the equipment

Heat exchange: The U-shaped heat exchange tube of the distillation kettle can meet the heating requirements by passing heat medium, and the temperature control accuracy is ± 1 ℃

Stirring: To improve heat transfer efficiency, mechanical stirring, magnetic stirring, or bottom magnetic stirring can be set up

After integration, it can achieve functions such as automatic feeding, automatic mixing, automatic temperature control, automatic pressure control, automatic reflux ratio control, online monitoring, etc

Equipment Material: Available in 304, 316L, 2507, TA2, 904L, etc

Customizable Capacity: 20L~120000L

Leakage rate: meets helium detection requirements of 1 * 10-9pa * m3/s

Special equipment requirements: Class I, Class II

Applicable operating conditions: Intermittent distillation, continuous distillation, temperature -60~425 ℃, pressure -0.1~10MPa

The distillation kettle adopts a horizontal reboiler structure with a very large heat transfer area. Due to the thin wall thickness of the U-shaped heat exchange tube, the heat transfer efficiency is high

Packing tower design, with a large number of theoretical plates and a large gas-liquid mass transfer contact surface, is particularly suitable for distillation of high-purity products

The pipe mouth cut-off valve is directly welded to the kettle body connection to minimize the risk of leakage as much as possible

The top discharge method of inserting the bottom pipe reduces the dead zone of bottom heat tracing and minimizes the risk of bottom valve leakage

The inner surface adopts electrolytic polishing technology, and the roughness can reach below 0.2um, with less material hanging on the wall

Mixing configuration online magnetic sensor, real-time monitoring of mixing speed. If magnetic stirring is used, it can detect magnetic attenuation